A USB connection is standard (free FT3 View™ Software); Optional HART and RS485 Modbus
SAFETY APPROVALS
(Safety approvals pending)
FM and FMc approvals pending, Class I, Div. 1, Groups B, C, D; Class I, Div. 2, Groups A, B, C, D; and Class II & III, Div. 1, Groups E, F, G. Indoor/outdoor, NEMA 4X; ATEX and IECEx approvals pending, Zone 1 and 2.
EMC APPROVALS
CE approved
CONTACT OR DISCRETE I/O
One discrete output for alarms & one discrete input to reset total. Discrete output unavailable if pulse output used
POWER INPUT
24VDC or optional 85-264VAC in local or remote enclosures
FM and FMc approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; CE approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box
CONTACT OR DISCRETE I/O
One discrete output for alarms & one discrete input to reset total. Discrete output unavailable if pulse output used
POWER INPUT
24VDC or optional 85-250VAC in local or remote enclosures
Fox Model 10A Flow Meter
MODEL 10A
MEASURES
Mass Flow Rate
NO. OF 4 TO 20 mA OUTPUTS
One
PULSE OUTPUT
None
DISPLAY
Standard, LED, 4 character, flow rate, total and elapsed time
COMMUNICATIONS
None
APPROVALS
FM & CSA approved for Class I, Div. 1, Groups B, C & D areas; FM approved Dust Ignition Proof for Class II/III, Division 1, Groups E, F & G; indoor/outdoor NEMA Type 4; CE approved. Optional Remote NEMA 4X enclosure not FM or CSA approved
CONTACT OR DISCRETE I/O
Two relay outputs for alarms
POWER INPUT
24VDC in local and remote enclosures. Optional 85-250VAC in remote NEMA 4X enclosure
Fox Thermal Gas Mass Flow Meter Features
Accurate low velocity gas flow measurement and wide turndown
Fox meters are excellent choices, even at very low flow velocities.
Direct Mass Measurement
Measure the flow of gases directly in Standard Cubic Feet per Minute (SCFM) and other mass units without temperature or pressure compensation.
Low Pressure Drop and No Moving Parts
A no moving parts design increases reliability and reduces maintenance costs.
Inline and Insertion Models available
Price
Fox Flow Meters offer exceptional value in terms of initial, installed and lifetime cost-of-ownership.
Click Here for a list of the most Frequently Asked Questions.
The FOX Model 10A is available in both inline and insertion-type configurations and suitable for harsh and hazardous applications.
The instrument offers a 4-20 mA output in your choice of engineering units, and the on-board display and configuration panel provides a bright LED read out of flow rate and totalized flow.
All wetted parts are 316 stainless steel, with Hastelloy C276 optional.
Applications
