Model FT2 Insertion Mass Flow Meter & Temperature Transmitter
Model FT2
Mass Flow Meter
INSERTION
The Fox Model FT2 Thermal Gas Mass Flow Meter and Temperature Transmitter measures two important process variables in one rugged instrument. The Model FT2 measures gas flow rate in standard units without the need for temperature or pressure compensation. It provides isolated 4 to 20 mA and pulse outputs for flow rate and a 4 to 20 mA output for process gas temperature. The pulse output is normally used for totalization.
The Model FT2 insertion meter is easily installed by drilling a 3/4" hole in the pipe and welding on a 3/4" NPT coupling. A Fox supplied compression fitting secures the probe in place.
The Model FT2 is supplied with 316 stainless steel wetted materials standard or Hastelloy C-276 as an option. RS232 for connecting a Palm Handheld or computer is standard. Interface options include RS422/RS485-Modbus, Profibus-DP, DeviceNet or Ethernet Modbus TCP.
Common Features for Insertion Fox Model FT2 Flow Meter:
Probes: 4” to 36”
Equipped with the Power Pro™ thermal mass flow sensor
Simple installation with weld-o-let and compression fitting
One discrete output for alarms & one discrete input to reset total
316SS probe and sensor standard; Hastelloy C276 optional
24 VDC power input or optional 85-250 VAC for local or remote models
FM and FMc approved for Class I, II, III, Div 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box.
Optional on-board display and configuration panel
CE approved
NIST traceable calibration
Wide measurement range
1% R + 0.2% FS flow accuracy
Additional Model FT2 Information to View and/or Download
Applications
