Model 10A Gas Mass Flow Meter

The Fox Model 10A Thermal Mass Flow Meter is the instrument of choice for reliable and accurate gas mass flow measurement.

The instrument measures gas in standard units without the need for temperature and pressure compensation.

Model 10A Mass Flow Meter
INSERTION

Probes: 4” to 36”
Simple installation with weld-o-let and compression fitting
316SS probe and sensor standard; Hastelloy C276 optional

Model 10A Mass Flow Meter
INLINE

Sizes: ¼” to 6”
Built-in flow conditioners; reduces straight pipe requirement
NPT, flange or butt weld end connections

Common Features for Inline and Insertion Fox Model 10A Flow Meter:

Measure process gas

NIST traceable calibration

1% R + 0.2% FS flow accuracy

24 VDC power input in local and remote explosion proof models

Equipped with the Power Pro™ thermal mass flow sensor

FM and CSA approved for Class I, Division 1, Groups B, C & D areas; FM approved Dust Ignition proof for Class II/III, Division 1, Groups E, F & G; indoor/outdoor NEMA type 4

Bright LED read-out of flow rate and total

CE approved

4 to 20 mA output proportional to mass flow rate

Remote NEMA 4X enclosure: fiberglass; non-explosion proof, not FM or CSA approved.

Standard on-board display and configuration panel

85-250 VAC optional for remote models (VAC model not FM or CSA approved)

Additional Model 10A Information to View and/or Download
Model 10A Datasheet		full spec
10A Features		pdf
10A Application Data Sheet	xls	pdf
10A Display Configuration Codes		pdf
10A Model Codes		pdf
10A Instruction Manual		pdf

Your choice of measurement units
SCFM	SCFH	SCFD
NM3/H	NLPM	SLPM
KG/HR	LBS/H	LBS/M

View Dimensional Drawings for Fox Model 10A Insertion by clicking the PDF links below:


10A Insertion Models
Local electronics, probe without retractor
Local electronics, probe with retractor
Remote electronics, probe without retractor - Explosion Proof
Remote electronics, probe with retractor - Explosion Proof
Remote electronics, probe without retractor - NEMA 4X
Remote electronics, probe with retractor - NEMA 4X

View Dimensional Drawings for Fox Model 10A Inline by clicking the PDF links below:


10A Inline Models
Local electronics, NPT end connections
Local electronics, 150# flange end connections
Remote electronics, NPT end connections - Explosion Proof
Remote electronics, 150# flange end connections - Explosion Proof
Remote electronics, NPT end connections - NEMA 4X
Remote electronics, 150# flange end connections - NEMA 4X